The weight of the nation free essay sample

More than 40 million children under the age evolve were overweight In 2011. Obesity is preventable. Most of the food commercials make you want to eat. My reaction to this movie is that people started eating more food over the 30 years so they should start taking food seriously. What makes people obese is: an increased Intake of energy-dense foods that are high In fat; and Increase In physical inactivity due to the increasingly sedentary nature of many forms of work, changing modes of transportation, and increasing urbanization. Not only the food matters but your physical activities that you do every day. childhood obesity Is associated with a higher chance of obesity, premature death and disability In adulthood. But in addition to Increased future risks, obese children experience breathing difficulties, increased risk of fractures, hypertension, early markers of cardiovascular disease, insulin resistance and psychological effects. overweight and obesity, as well as their related noncommunicable diseases, are largely preventable. We will write a custom essay sample on The weight of the nation or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Supportive environments and communities are fundamental in shaping peoples choices, making the healthier choice of foods and regular physical activity the easiest choice (accessible, available and affordable), and therefore preventing obesity. At the individual level, people can: limit energy intake from total fats and sugars; increase consumption of fruit and vegetables, as well as legumes, whole grains and nuts; engage in regular physical activity (60 minutes a day for children and 150 minutes per week for adults). The weight of the nation essay By 611 The movie we watched is called The weight of the nation. I learned that: 200 million men and nearly 300 million women were obese. 5% of adults aged 20 and over were overweight in 2008, and 11% were obese. 65% of the worlds

scream 3 essays

scream 3 essays Scream is a movie created by Wes Craven (creator of A Nightmare on Elm Street) is a turn of the tables on the typical horror flick. The problem with todays slasher movies is that the characters are all one-note stereotypes, the plots are ridiculous, the action always follows the same dreary pattern, and the only creative effort is in the new bloody makeup effects. Wes Craven changes all this. He reinvents what makes going to the movie such a thrill by scaring you all over again. The killer in Scream is very eccentric, in that, he can quote literally all of every other horror film ever made! He uses this talent by terrorizing certain teens in a California town. At the top of the killers list is Sidney who is played by Neve Cambell. Her past is what has makes her the killers target. Her mother died one-year back in a brutal murder, (which is somehow linked to the killer) so she is too depressed to make time for her boyfriend (Skeet Ulrich.) She is also very upset at a tabloid-TV reporter ("Friends" co-star Courtney Cox) because her book claims that Sidney pointed at the wrong guy responsible for her mothers death. The first scene of Scream, in which Drew Barrymore is used as the killers first success, makes the audience sit at the edge of their seats throughout the rest of the movie! First, Barrymore gets a mysterious call while making popcorn. Just few minutes later, a failed trivia quiz made by the killer about "Friday the 13th" leads to a murder that puts a small California community on the alert. David Arquette, who played Dooy, is goofily charming as a semi-naive deputy who's infatuated with Cox. He is a less than qualified deputy who is truly committed in attempting to keep his sister, her best friend Sidney, and of course Courtney Cox safe. The real action of the movie really gets rolling at a teen keg party - the prime location for any slice-and-dice movie....

Articles Article Example | Topics and Well Written Essays - 500 words

Articles - Article Example Similarly, consider a farmer giving maize to a consumer in exchange for money. Definitely, the two parties are made better off in the second case, but the farmer is made worse off in the first case. So it is just better to have a free market. After reading the article, I thought that greed may be important as suggested by Williams, but it may also be used in a negative way. It is not that I oppose the argument of Williams; it is only that I do not fully agree with him. It is indeed true that most economically beneficial activities are performed as a means of pursuing one’s own interests. However, doing something with the interest of others in mind could lead to honesty and quality of service. For example, if Texas ranchers hated New Yorkers, they would decide to deceive them in terms of weighing scales. This would be unethical and socially irresponsible, and it would cause a decline in overall welfare of New Yorkers and ranchers of Texas. As much as I also think that the author was clever in the manner in which he used the example of ranchers and potato farmers, I also believe that he left out an important aspect of sustainable development – business ethics and social responsibility. Caring about one’s interests alone is unethical and has negative repercussions in the economy. I think this article explains capitalism and the free market in such a way that a common man can realize the importance of free market. I have learned that capitalism has given the common man an opportunity to enjoy the benefits of the free market just like the rich people. I think equal distribution of resources can be achieved if the free market works effectively. I think this post has demonstrated a good observation of the author. Nowadays the common man can enjoy some luxuries that were not enjoyed back in the yesteryears. Indeed, it is interesting; and I think it is all because of the great opportunities that the free market and capitalism have

Project Finance in the FertiNitro Company Coursework

Project Finance in the FertiNitro Company - Coursework Example Polar is a passive sponsor of FertiNitro and is not directly involved in the business of construction and operation of the fertilization plant. Polar is mainly a food and beverage company with present joint ventures in companies like Koch and Pequiven which are the major stakeholders of FertiNitro. The total revenue generated by the Polar group is the US $1.9 billion. More than 2% of the company goes to Venezuela’s non-oil GDP (Duff & Phelps, 1998, p.5). Impact of the Sponsors’ contribution on the project in terms of viability as a stand-alone project financing The strategy adopted by Polar in the investment of export projects has generated profitable returns to Venezuela. The first project to invest in Polar is FertiNitro. The indirect involvement of Polar in the project of FertiNitro has resulted in being the important mitigant to it. PDVSA gas is the subsidiary company of Polar Group which contributes to the major portion of the gas requirement of the country made available by FertiNitro. The foreign exchange over the past decades has been favorable for PDVSA which gives FertiNitro another reason to make the Polar group a part of its sponsors. The indirect participation of PDVSA in FertiNitro the foreign transfers and the risk convertibility gets minimized. PDVSA also has the leading market in urea in South America along with Pequiven which is the petrochemical wing of PDVSA. PDVSA is also responsible for offsetting the risk of the volatile market by lowering the cost of the feedstock gas supply. PDVSA is the world second largest Oil and Gas Company contributes the most to the FertiNitro as the company both directly and indirectly invests in the company. Even the internal funds of Pequiven are sponsored by PDVSA. Thus the viability of FertiNitro based on the stand-alone project financing of the Polar Group will bring about remarkable results as the company in engages in both direct and indirect financial investment for the company. Both the cost overruns and the time overruns of the company will be under check in spite of the fact that as Polar the company contributes to the 10% of sponsorship to FertiNitro and is a passive sponsor. Following aspects of the project with relevant matters Off-taker, The Polar Group has signed an offtake agreement with both Pequiven and Koch Off takers which are both joint ventures. The Koch Off taker bears the obligation of 75% of the ammonia and 43% of an area of the company that is available for sale during the year. Similarly, the rest of the obligation of the Polar Group’s off-take agreement lies with Pequiven. Certain specification of the company related to the off-taker agreement has to be abided by the mentioned companies like appointing an independent inspector regarding the approval of the off-takers who will be in charge of determining the quality of the product to be delivered. Based on the independent inspector’s assessment the rejection of the non-conforming products is made or availed at a discounted rate. At the initial level of agreement, Koch will have the rights to sell the products and delivering the same in North America while Pequiven will follow a similar act in South America, Caribbean, and Central America.  Ã‚  

American politics questions Essay Example | Topics and Well Written Essays - 500 words

American politics questions - Essay Example Moreover, the mighty state government can ask the central government to remain close to the people in state governments and to be more concerned with the needs and aspirations of the people especially relevant to small and isolated places. On the other hand, there are a number of demerits attributed to the states having a strong political role in America. As the state government is in warm relation with the central government, it is forced to obey even the one-sided decisions of the central government. It leads to duplication of government and inefficient, over-lapping or contradictory policies in such states. The unilateral policy making and decisions of the central government may lead to inequality between the states and thereby unhealthy competition and rivalry between them. The double ruling of the central as well as state government in the constituents may pave way for corruption. The phrase tyranny of majority means a situation in democracy where the party that gets majority of votes has the sole role in formulating policies and making decisions completely snubbing the interests and role of the minority. The term also indicates that the interests of the ruling party will be prevailed and this ignores individual interests; and such a situation can be regarded as the rule of a dictator or tyrant. Even if the decision taken by the ruling party has some evil effects, it will remain in force. Suppose the majority is 51% and the minority is 49%, a huge number of 49% people will have to suffer for the tyranny of a simple majority. To overcome the deficiencies of such a government Madison proposed the establishment of a new Constitutional republic government in which the scheme of representation takes place. According to him, it can avoid the tendency of â€Å"tyranny of majorities† that occurs in pure democracy through two basic means (Bardes, Shelley, and Schmidt, 45-47). In the first place, the representative

Industrialised Building System: Precast Concrete Elements

Industrialised Building System: Precast Concrete Elements In Malaysia, the implementation of Industrialised Building System (IBS) by using precast concrete elements were introduced since 1966 when the government lauched two projects which involves the construction of Rifle range Road Flats in Penang and Tuanku Abdul Rahman Flats in Kuala Lumpur. From the survey conducted by CIDB Malaysia, the level of usage in IBS in the local construction industry is 15 % in 2003 although many government initiatives have been introduced to encourage the use of IBS. Therefore a study is conducted to study will be conducted to study the current awareness of the usage of IBS in Malaysia. Furthermore this study will be conducted to analyse ways to improve the implementation of IBS in the local construction industry. Chapter 1: Introduction 1.1 Rationale for the Research Industrialised Building System (IBS) was introduced since the 60s in Malaysia. There are several benefits of IBS such as speed up the construction progress and possibly reduce labour force, construction cost and risk as well. Even IBS have many benefits but there is still have some problems in implementing IBS into the construction industry mainly due to lack of knowledge in IBS among the contractor. Research done by Lim Sin Peng in year 2009 showed that the usage or implementation level of IBS is still low in Malaysia construction industry. According to Construction Industry Development Board (CIDB) (2003b) report construction project using IBS in Malaysia stands 15 percentage (%) in the year 2003 and the complete project using IBS in year 2006 only 10 % ( CIDB, 2007b) less than one-third of the total construction project (using at least one IBS product) in year 2006 (CIDB 2007a). The first IBS project, Pekeliling Flat, was initiated by the Government at Jalan Pekeliling, Kuala Lumpur in 1964. The implementation of IBS in Malaysia was not well accepted by the construction industry after the first adoption of IBS proves to be a failure in keeping to construction cost within the estimated budget. Thus, the aim of study is to change the perception of the construction industry towards IBS. 1.2 Problem Statement The implementation level of IBS is perceived to be lower compared to the advantages outlined by the construction industry. The following questions need to be answered before the issues could be addressed: Question 1: What is the implementation level of IBS in Malaysia construction industry? If the implementation level of IBS is consider low in Malaysia construction industry, then only can proceed to the next research question. Question 2: Why there are fewer contractors implementing in IBS? This will provide some ideas that about what stop the contractors from using IBS. Question 3: How to motivate contractor to implementing in IBS? This will provide recommendation to increase the level of implementation to meet the objectives of CIDB and Government to provide better production in construction industry. 1.3 Research Aim The research aim is to examine the reasons and factors of why fewer contractors implement IBS in Malaysia construction industry 1.4 Objectives The objectives of this study are to establish the implementation level of IBS here in Kuala Lumpur as general of Malaysia. The study also determines the barriers to contractors for not implementing IBS. In addition, it also evaluates the usefulness and advantages of using IBS. Moreover, the study also is to recommend factors that would encourage contractor to implement IBS. 1.5 Importance and Benefits of Study The importance of this study is to find out the reasons of unpopularity of this system in Malaysia in comparison to other countries such as Japan, Singapore, and United Kingdom (UK) which have implemented the IBS successfully. In chapter 2, the literature reviews will discussed further. Beside that, the benefits of this study are Getting familiar with the concept of IBS Clear of view on the type and characteristics of IBS Get to know the level of acceptance of IBS in Malaysia construction industry Visualized the benefits and limitation of using IBS 1.6 Scope of Research and Limitation In the dissertation, the scope of study will on focus on the adoption level of using IBS especially in the contractor point of view. Further more, some reasons and factors that might affect the implementation of IBS and what would be the best motivations for contractor to use IBS will be discuss as well. The limitation of this research is the questionnaire requires a lot of respondent around 200 and it does not ensure that they will make any feedback. Due to the limitation of the transport and there are many contractor firms, so this research will only remain in Kuala Lumpur and Klang Valley area. 1.7 Research Methodology 1.7.1 Questionnaire Quantitative method will be used to conduct this research. Question survey will be conducted for targeting respondent from Kuala Lumpur and Klang Valley area to determine their awareness of the certain issues or factors. This method will take some time of conducting a survey, so time must be allowed for late returns and responses to follow up attempts. Moreover, this is the simplest way to obtain information from targeted groups. Data collected from questionnaire will firstly check for the accuracy before carried out to work out the analysis by using statistical analysis software such as SPSS. Objective 1 To find out the implementation level of IBS in Malaysia Objective 2 Determine the barriers for contractor to implement IBS Literature Review Quantitative method Objective 3 Evaluate the positive effect of using IBS Questionnaire Objective 4 Give factors that would encourage contractor to implement IBS Analyze and develop solutions SPSS software Achieve aim and objectives. Conclusion and Recommendation Figure Research Methodological Method 1.8 Structure of Dissertation This dissertation is consists of five (5) chapters as described as below: Chapter 1 Introduction This chapter includes brief description of the problem statement with the purpose of conducting this research and its aim and objectives. It also includes the scope of study and benefits of the study. In addition, a brief description of the method that used in study, collecting relevant data and information. A brief introduction on the subsequent chapters is discussed as well. Chapter 2 Literature Review This chapter focuses on the review made from articles, journal, newspapers cutting, quotes from authors and online articles related to IBS. The fundamental part of this chapter is to discuss in depth about the benefits of using IBS, limitation of using IBS and barriers implementing IBS in construction industry of Malaysia. Chapter 3 Research Methodology This chapter explains the methodology will adopted in detail including the method used by the researcher to achieve the earlier mentioned objective for the research purpose. Chapter 4 Analysis of the Results This Chapter will covers the presentation on the result from carries out the data collected from the respondents through the survey questionnaire will be analyzed and will be tabulated in the form of chart and discussed in detail. Chapter 5 Conclusion and Recommendation This chapter concludes the research, its findings and analysis regarding the issue of the study including the limitations encountered during the research. The last part of this chapter is the recommendations and some personal comment had been given to improve the study as well as future research. Chapter 2.0 Literature Review 2.1 Introduction In this chapter, the author reviewed works done by others through journals, articles, newspaper cutting, and quotes from authors and online articles collected. IBS system is a process to speed up the construction work and to minimize the dependency of labour on site. The objective of this study is further discussed about the barriers of contractor in implementing IBS. Besides that, this chapter also will focus on the basic review of IBS such as definitions, background, types and characteristics in IBS and have a basic introduction about the detail of IBS. Industrialised building is the term given to building technology where modern systematized methods of design, production planning and control as well as mechanized and automated manufacture are applied (Ingemar Lofgren and Kent Gylltoft, 2000) While Building system mean a building system includes design rules and a product system whose parts have compatible interfaces, thus permitting the use of several alternative components and assemblies is assured by means of a dimensional and tolerance system as well as connection and joint (Ingemar Lofgren and Kent Gylltoft, 2000) 2.2 Definition of IBS There was no commonly accepted or agreed definition of IBS. Several authors have defined IBS as process or a technique. Blimas et. al. (2006) and Pan et. al. (2008) defined that IBS is often referred by literatures as off -site construction, off-site production, industrialised and automated construction. Warszawski (1999) explain in detail that an industrialized process is and investment in equipment, facilities, and technology with the objective of maximizing production output, minimising labour resource, and improving quality while a building system is defined as a set of interconnected element joint together to enable the designated performance of a building. Another definition by Trikha (1999) claimed that IBS also may be defined in which all building components such as wall, floor slab, column and staircase are mass produced either n factory or at site under strict quality control and minimal on site activities Another definition that clarified by Junid (1986) where IBS as process by which components of building are conceived, planned and fabricated, transported and erected at site. The system includes balance combination between software and hardware component. The software elements include system design, which is complex process of studying the requirement of the end user, market analysis and the development of standardise component, establishment of manufacturing and assembly layout and process, allocation of resources and materials and definition of a building designer conceptual framework.The software elements provide a prerequisite to create the conducive environment for industrialised to expand. According to Junid (1986), the hardware elements are categorised into three major groups. These include frame or post and beam system, panel system, and box system. The framed structures are defined as those structure that carry the loads through their beams and girders to columns and to the ground whilst in panel system load are distributed through large floor and wall panels. The box systems include those system that employ three-dimensional modules (or boxes) for fabrication of habitable units are capable of withstand load from various directions due to their internal stability. CIDB defined IBS as construction system whereby the components are manfactured in a factory, on-site or off-site, then positioned and assembled into structures with minimal addtional site work. 2.3 Classifications of IBS This section will focus on the classification of the building system that are published internationally and in Malaysia There are four types of building system under IBS in Malaysia and there are namely conventional column-beam-slab frame systems with timber and plywood as formwork, cast in-situ system with steel or aluminium as formwork, prefabricated system and the composite building system is shown in figure 2.1. Each building system is represented by its construction technology, functional and geometrical configuration (Badir et al, 1998). (cited at Thanoon et. al., 2003) According to Majzub (1977) has different concept in classifying building system that is the relative weight of the components should be used as a basis for building classification shown in figure 2.2. The factor of weight has significant impact on the transportability of the components and also has influences on the production method of the components and their erection method on site. This classification method is found to be inadequate to incorporate other building system flourish recently. There are five types of IBS had being used in Malaysia: (IBS Road Maps 2003-2010) Type 1: Pre-Cast Concrete Framing, Panel and Box System The most common group of IBS products is pre-cast concrete of elements in construction industry. For example, there are including columns, beams, slabs, Three-Dimension (3D) components (balconies, staircase, toilet, lift chambers), permanent concrete formwork, and so on. (CIDB, 2005). Pre-cast concrete framing, panel and box system is under categories of prefabricated system. The advantage using this is because it cans minimum waste due to work environment in factory is easier to control. Panel system is use for the construction of interior walls and exterior walls offer speed of construction in many ways. For box system will achieve ultimate objective of industrialization that is a maximum saving of human labour on site. Figure Pre-cast Concrete Elements Type 2: Steel Formwork Systems This system considered as least prefabricated IBS, as they generally involve site casting and subject to offer high quality finishes and fast construction with less site labour can come in tunnel formwork, beams, columns, and slab moulding forms permanent steel formworks (metal decks) and so on. (CIDB, 2005) The steel formwork is prefabricated in the factory and then installed on site. Figure Steel Formwork Systems Type 3: Steel Framing System This system always be the popular choice and used intensively in the fast-track construction of skyscrapers. Recent development in this types system included the increased usage of light steel trusses. Steel is non combustible material and improves fire safety and reduces amount of structural damages in the event of a fire happen. Example: Steel beam, columns, portal frames, roof trusses. (CIDB, 2005). Steel framing also consider as prefabricated system and it to be erected whereby welding at joints are conducted. This system cans faster the progress construction. Figure Steel Frame Systems Type 4: Prefabricate Timber Framing System While the latter are more popular, timber building frame offering interesting designs from dwelling units to buildings requiring high aesthetical values such as chalets for resorts Example: Timber frame, timber roof trusses (CIDB, 2005). The advantage of the system is mainly in the interior flexibility, as large space can be used for different functions and can be easily changed or modified according to the use. Figure Prefabricated Timber Framing System Type 5: Block Work System This system has revolutionizes by the development and usage of interlocking concrete masonry units (CMU) and lightweight concrete blocks. The tedious and time-consuming traditional brick-laying tasks are greatly simplified by the usage of there effective alternative solutions. Block work system also consider under prefabricated system. The benefits of block work system are faster construction and increase bricklayer longevity. Moreover, its also increased energy savings like lightweight concretes resistance to heat flow is twice of medium and heavy weight concrete, its mean that less heating/cooling energy is needed. Figure Block work 2.4 Characteristics of IBS It is important to have the following characteristics only consider to be accepted as part of the IBS and ensure the achievement of proven benefits of IBS. Each of them will be discuss briefly at below (CIDB 2008): Industrial production of components though pre-fabrication; or highly mechanized in-situ processes. For example, permanent steel formwork Reduced labour during pre-fabrication of the components and site works. Modern design and manufacturing methods involving information Technology such as the usage of Computer Aided design (CAD) and Computer Aided Manufacturing (CAM) Systematic Quality control such as ISO 9000 principles Open Building Concept i.e permitting the hybrid applications, and adaptable to standardization and Modular Coordination (MC) Figure The Characteristics of Building System Sources: Adopted from Abdullah M.R., 2009 2.5 Implementation Level of IBS in Malaysia The use of IBS have various advantages such as the reduction dependency of foreign workers, less wastage, less volume of building materials, increased environmental and construction site cleanliness and better quality control compare to conventional method. These advantages also promote a safer and more organised construction site, and reduce the completion time of construction. Many world-class Malaysian developers have chosen IBS over the conventional methods for important projects such as the Petronas Twin Towers, Putrajaya, KL Sentral, and KLIA. (IBS Roadmap, 2003 -2010) Even so, the usage level of IBS in building is still low. From a survey conducted by CIDB Malaysia, the usage level of IBS in the local construction industry stands at only 15% (IBS Survey 2003). The early efforts of the Government to encourage the use of IBS in the construction sector has yet to garner a good response, and this sector is still practicing conventional construction methods that have proven time and again to be wasteful, dangerous and messy. Relatively, the low labour cost in this country is the root cause of the industry failing to reform and being complacent with the current level of productivity, quality and safety. (IBS Roadmap, 2003 -2010) Moreover, according to the newspaper the star 2009 stated that Jamilus explained that IBS was a construction technique in which components were manufactured in a controlled environment (on-site, off-site), transported, positioned and assembled into a structure with minimal additional site work. Beside that, out of 1,400 contractors in Johor, there only 4% of it are using this systems. Moreover, he said that since year 2008, there only 51 contractors in the state have been reported to use the IBS system in their building projects and the number were expected improve in time. (The star, 2009) 2.6 Malaysias Experiences in IBS The usage of IBS is not new in the Malaysia construction industry. The idea using IBS in Malaysia was first purpose during the early 60s when the Minister housing and Local Government visited several European countries and evaluated their building system performance. At the time, the government makes a big decision to give a try on a two pilot projects using IBS concept. The first project, Pekeliling Flat was constructed along Jalan Pekeliling with construction of 7 blocks of 17 storey flats, and 4 blocks of 4 storey flats comprising around 3,000 units of low cost flats and 40 storey shop lot and this project using large panel industrialized prefabricated systems. On the other hand, the second project was built in Penang with the construction of 6 blocks of 17 storey flats and 3 blocks of 18 storey flats comprising 3,699 units and 66 shop lots along the Jalan Rifle Range and this project was using the French Estiot System (Din, 1984). Even though the first implementation IBS was not successful due to the failure to keep within cost estimation but there are some successful adoption too. Among the significant projects that implement IBS are including KL Sentral. KL Convention Centre, KLIA, etc Following is the Successful implemented of IBS throughout Malaysia (CIDB Malaysia, 2003) Year 2007 Stormwater Management and Road Tunnel (SMART Tunnel), Kuala Lumpur The Spring Shopping Mall, Kuching, Sarawak Year 2006 Kuching International Airport, Kuching, Sarawak Persada Johor International Convention Centre, Johor Bahru Year 2005 Serdang Hospital, Serdang, Selangor The Curve, Mutiara Damansara, Selangor Year 2001 Kuala Lumpur Sentral ( KL Sentral), Kuala Lumpur Likas Stadium, Kota Kinabalu, Sabah Year 1998 Kuala Lumpur International Airport (KLIA), Sepang, Selangor Malawati Indoor Satdium, Bukit Jalil, Selangor Year 1997 Petronas Twin Tower, Kuala Lumpur Bukit Jalil, Bukit Jalil, Salangor Year 1984 Daybumi Complex, Kuala Lumpur Year 1981 High end bungalows and low cost houses throughout Selangor 2.7 The Advantages for IBS adoption in Construction Industry There are some several advantages using IBS (MCRJ, 2009) 1. Reduce Remittances by foreign worker: The Government aimed to achieve 100 percent usage of IBS and to reduce to 15 percent or approximately 50,000 of foreign workers in the construction industry by 2010. With the current foreign workers totaling 227,000, the remittances of the foreign workers amounted to about 7.5 billion. It is expected that the Government would be able to reduce the remittances with the full implementation of IBS. (Bernama.com, 2006) 2. Enhance Efficiency of Construction Process and Higher Productivity: IBS is a methodology whereby a local construction industry is driven towards the adoption of an integrated and encouraging key players in the construction industry to produce and utilize pre-fabricated and mass production of the building at their work sites. This will help to enhance the efficiency of construction process, allowing a higher productivity, quality, time and cost saving. (CIDB, 2004) 3. Produce Better Product: IBS promises elevated levels of expertise throughout the industry, from manufacturers, installers, engineers, planners, designers, and developers. The benefits of IBS will ultimately produce better products for the population (CIDB, 2003) 4. Reduce Wastage, Less Site Materials, Costs, Cleaner and Neater Environment: The IBS, which enables on-site prefabricated or pre-cast building components manufactured at factories offers minimal wastage, less site materials, cleaner and neater environment, controlled quality, and lower total construction cost (CIDB, 2003). For example, the repetitive use of system formwork made up of steel, aluminium, etc and scaffolding provides considerable cost savings (Bing et al. 2001). 5. Higher Quality of Component: An industrialised building system component produces higher quality of components attainable through careful selection of materials, use of advanced technology and strict quality assurance control (Din,1984) 6. Reduce Labour at Site: Prefabrication takes place at a centralised factory, thus reducing labour requirement at site. This is true especially when high degree of mechanisation is involved (Warszawski, 1999) 7. Faster Completion: An industrialised building system allows for faster construction time because casting of precast element at factory and foundation work at site can occur simultaneously. This provides earlier occupation of the building, thus reducing interest payment or capital outlays (Waleed et al., 2003) 8. Not Affected by Adverse Weather Condition: Construction operation is not affected by adverse weather condition because prefabricated component is done in a factory controlled environment (Waleed et al., 2003) 9. Flexible Design: An industrialised building system allows fexibility in architectural design in order to minimise the monotony of repetitive facades (Warszawski, 1999). An industrialised building system provides flexibility in the design of precast element as well as in construction so that different systems may produce their own unique prefabrication construction methods (Zaini, 2000) 2.8 Barriers of Adoption in Malaysia Construction Industry IBS can replace the conventional building system which is labour oriented However, since the first project of IBS not well accepted by construction parties because of fail to deal with the risks such failure of keep within the cost estimate. For example, the first project incurred 8.1 % higher costs than a similar building that using conventional construction method, while the second project was 2.6% lower than the cost. Both projects also completed in 27 months in term of compare to the construction speed but are inclusive the time of set up the recasting factories too. When come to the quality, the conventional method seems have better quality than IBS. In conclusion, there is a competitive with conventional construction method. Even though IBS is good to implement due to its advantages but the implementation of usage level is still very low. According to Waleed et. al. (2003), the common consensus of all the stakeholders of construction in Malaysia is that, the IBS implementation in Malaysian building construction industry is still very low compared to the conventional methods. This is due to several reasons(MCRJ, 2009): 1. Costs and Return Investment: Wide swings in houses demand, high interest rate and cheap labour cost, make it difficult to justify large capital investment. At present there is an abundance of cheap foreign workers in Malaysia and contractors prefer to use labour intensive conventional building system because it is far easier to lay off workers during slack period. The economic benefits of IBS are not well documented in Malaysia and the past experiences indicated IBS is more expensive due to fierce competition from conventional building system. 2. Lack of skilled and knowledgeable manpower: Fully prefabricated construction system requires high construction precision. Malaysian labour force still lack of skilled workers in IBS implementation. 3. The Practices: The construction industry is very fragmented, diverse and involves many parties. Consensus is required in the use of IBS during planning stage. 4. Knowledge based: Lack of Research Development (RD) in the area of novel building system that uses local materials. Majorities of IBS in Malaysia are imported from developed countries, thus driving up the construction cost. Engineering degrees in local universities seldom teach about the design and construction of IBS. 5. Low Quality: The use of IBS in Japan and Sweden are so successful due to high quality and high productivity but it sis the opposite in Malaysia. Previous projects constructed with IBS concept were of low quality and high construction cost. 6. Lack of Incentive and Awareness: Due to the lack of incentive and promotion from government in the use of IBS, many many architects and engineers are still unaware of the basic elements of IBS such as modular co-ordination. 7. Lack of Scientific Information: An IBS system can only be acceptable to practitioners if its major advantages are valuable compared to the conventional system. However, up to date, there is inadequate corroborative evidence to substantiate the benefits of IBS system. It is therefore, arguable that the implementation of IBS is particularly hindered by lack of scientific information (Badir et al., 2002) 8. Wastage of Material: Standardization of building elements faces resistance from the construction industry due to aesthetic reservation and economic reason. One good example of this is when a 300mm thick modular standardized floor slab has to be used although a 260mm thick floor slab can achieve the similar structural performance. This results wastage of material (Waleed et al., 2003) Issue that related to IBS and contractor 1. IBS first time use by DBKL in infrastructure project of build a bridge Jalan Dewan Bahasa-Jalan Hang Tuah because of time saving and reduce traffic jam. This also can give benefit for those students that around the school area. Beside that, around 75 % of IBS have been use to prevent any problem that not complete according to the schedule. Ibs also can save time, reduce labour and site very clean, tidy and have quality. Mostly IBS is use for building. This project is the first infrastructure project using IBS. Moreover, the rest of the project will be using IBS. 2.9 Summary of the Chapter Nowadays in Malaysia, IBS still being developed and applied in new building. Mean while, the implementation level is still very low what has anticipate by the government. The purpose of IBS is very clear as an alternative for conventional method and also reduces the dependency of labour, and increase the performance in time, cost, and quality. The Government of Malaysia promote IBS component to the construction industrials. In the literature review have proved that there are many benefits of IBS but still is low usage among contractors and the implementation of using IBS level is still very low. Chapter 3 Research Methodology 3.1 Introduction Research methodology explains methods that used in the research study, what data have been collected, what method is adopted, why particular technique of analyzing data used; all of these will be answered in this chapter. The quantitative approach will be carried out in this research and the questionnaire survey method will be used in this research. This section of study will focus on the method of the study to achieve the objective of this research. The questionnaire has been chosen to survey the factors, and degree of acceptance, usage, advantages and comment of adoption in IBS. This method is saving in terms of time and cost as well as convenient as it can distributes to large amount of respondent but the possible also did not get receive any respond from respondent and the quality of the information gather from questionnaire might inconsistent and inaccurate and also need to be carefully analysis. 3.2 Method of Research Figure 3.1 shows the methods that be carried out in order to achieve the objective of this study and followed by the explanation of each step. Constructing Questionnaire Distribute Questionnaire Results Gathering and Analysing Conclusion Figure Method of Research 3.2.1 Construct the Questionnaire For the purpose of designing the question, the research objectives and literature review had been taken into account to lead to differentiate various issues, topics and ideas to create the questions in the questionnaire. The quantitative questionnaire will be use in this study. Before questionnaire to be produce out, there should be required to review thoroughly to the literature review and the research aim and objectives. This is to make sure that there will not be out of topic from the research, this is the initial stage for formulating question. Secondly, produce question that can achieve aim and objectives and related to literature review. The third stage is to make the questionnaire easy to understand and suitable with comprehensive but short enough, no leading question and double question. This will make respondents can fill up easily and faster due to the possibility that the respondents are busy. 3.2.1.1 The Rationale of Questionnaire Design The first part is ask about the background or experiences a

An Annotation of Emily Dickinsons I Taste A Liquor Never Brewed Essay

An Annotation of Emily Dickinson's I Taste A Liquor Never Brewed This poem by Emily Dickinson is much harder to figure out compared to her usual poems. She writes about a topic that is not normally written about at this time especially by a woman. At first glance, it is thought that this poem is about liquor and all of the bad things that go along with it, when in all reality it is a poem about sheer happiness. Dickinson is speaking not of a high derived from any alcoholic beverage, but rather of one acquired from life itself. I taste a liquor never brewed (214) Emily Dickinson I taste a liquor never brewed-- From tankards scooped in Pearl-- Not all the Vats upon the Rhine Yield such an Alcohol! Inebriate of Air--am I-- And Debauchee of Dew-- Reeling--thro endless summer days-- From inns of Molten Blue-- When "Landlords" turn the drunken Bee Out of the Foxglove's door-- When butterflies--renounce their "drams"-- I shall but drink the more! Till Seraphs swing their snowy Hats-- And saints-- to windows run-- To see the little Tippler Leaning against the Sun-- Despite the existence of metaphorical comparisons with drunkenness and liquor, this is definitely not a poem about any form of chemical intoxication. It is an expression of the author's love for a "drunken state"', created by how wonderful she believes life to be. In the second line, I realized the genuine depth of Emily Dickinson's affection for life. Here, she wrote, "From tankards scooped in Pearl," indicating special beer-drinking glasses, outfitted in pearl rather than in ceramic or in clay. According to my research, these were used during her time to drink in a more exquisite, elaborate fashion, usually when one had a notable fondn... ...y. It was the little things that gave her joy and pleasure. Just being surrounded by nature and other creatures gave her the happiness that others need marriage and money to find. Many of Dickinson's poems focus on the themes of life, love, and nature. This one has a little bit of all of those themes tied into it. It describes her love of life and nature by comparing it to the feeling one gets when they are drunk. Dickinson is very inspirational in this poem by showing us that there are many things in life to be greatful for and that we should experience this sense of joy and tranquility when we are surrounded by the simple pleasures of life that have been given to us all. Works Cited Dickinson, Emily. "314." The Complete Poems of Emily Dickinson. Ed. Thomas H. Johnson. Boston: Little, 1960. Encyclopedia Britannica. 12/05/01. Online. www.britannica.com.

The Silver Linings Playbook Chapter 4

The Worst Ending Imaginable Knowing that Nikki does a big unit on Hemingway every year, I ask for one of Hemingway's better novels. â€Å"One with a love story if possible, because I really need to study love – so I can be a better husband when Nikki comes back,† I tell Mom. When Mom returns from the library, she says that the librarian claims A Farewell to Arms is Hemingway's best love story. So I eagerly crack open the book and can feel myself getting smarter as I turn the first few pages. As I read, I look for quotable lines so I can â€Å"drop knowledge† the next time Nikki and I are out with her literary friends – so I can say to that glasses-wearing Phillip, â€Å"Would an illiterate buffoon know this line?† And then I will drop some Hemingway, real suave. But the novel is nothing but a trick. The whole time, you root for the narrator to survive the war and then for him to have a nice life with Catherine Barkley. He does survive all sorts of dangers – even getting blown up – and finally escapes to Switzerland with the pregnant Catherine, whom he loves so much. They live in the mountains for a time, in love and living a good life. Hemingway should have ended there, because that was the silver lining these people deserved after struggling to survive the gloomy war. But no. Instead he thinks up the worst ending imaginable: Hemingway has Catherine die from hemorrhaging after their child is stillborn. It is the most torturous ending I have ever experienced and probably will ever experience in literature, movies, or even television. I am crying so hard at the end, partly for the characters, yes, but also because Nikki actually teaches this book to children. I cannot imagine why anyone would want to expose impressionable teenagers to such a horrible ending. Why not just tell high school students that their struggle to improve themselves is all for nothing? I have to admit that for the first time since apart time began, I am mad at Nikki for teaching such pessimism in her classroom. I will not be quoting Hemingway anytime soon, nor will I ever read another one of his books. And if he were still alive, I would write him a letter right now and threaten to strangle him dead with my bare hands just for being so glum. No wonder he put a gun to his head, like it says in the introductory essay.

Tda 3.4 1.1

Summarise the policies and procedures of the setting relevant to promoting children and young people’s positive behaviour In my setting there are several policy documents that advise both parents and teachers what procedures are in place to help the children to perform to the best of their abilities and also set out guidelines of what the school expects off the staff, pupils and parents. Our schools behaviour policy also incorporates both the code of conduct, dealing with inappropriate behaviour and the rewards and sanctions guidelines, separate to this are the anti bullying policy and the whole school attendance policy . The behaviour policy firstly sets out the aims of the school, explaining how the school promotes good relationships so that people can work together with a common purpose of helping everyone to learn and work together in an effective and considerate way, this is aimed not only at the pupils but to parents and staff alike. It continues to explain that this policy is in place to enable children to grow in a safe and secure environment, and to become positive, responsible and increasingly independent members of the school community. It then goes on to explain the code of conduct expected off children, staff and parents. This includes rules such as parents and staff not smoking in the school grounds, conduct of parents when collecting their children from school i. e. not swearing and being too loud while lessons are still ongoing, to giving guidelines on what is expected from the children while at school. In these guidelines it explains how the school has it’s set of rules but also that each class teacher, at the beginning of the school year, discusses with the children what is expected, behaviour wise, in their class. The children are also invited to give ideas for these class rules, these rules are then printed out and displayed in the classroom. This document then goes on to explain the rewards and sanctions policy, this explains how the children are rewarded for good behaviour in a variety of ways, such as, the giving of house points and presenting their work in school assemblies, it also states as the child gains more house points they work towards certificates Gold, Silver and Bronze, all the achievements the child earns are stored in their Record of Achievement file, which is presented to them as they leave school in year 6. In the explanations of the sanctions the policy, this is under the dealing with conflict and inappropriate behaviour section, gives examples of behaviour that is unacceptable, this can be things such as shouting out in class, being in areas they shouldn’t be and goes, on to the extreme cases such as bullying and assault. It then goes onto the giving of detentions or missing playtimes because of this behaviour and in the more serious cases it explains the fixed-term and permanent exclusions policy. Finally the document goes to explain the roles of all staff members within the school this includes support staff, teachers, head teacher and finally the school governors. These roles are explained in a brief way and if there are any questions to any part of the document not to hesitate to ask for more guidance. The schools anti-bullying policy firstly explains the schools definition of bullying, which is, â€Å"bullying is action taken by one or more children with the intention of hurting a child, either physically or emotionally†. It then goes on to give the schools aims and objectives in this matter, this covers developing the schools ethos in which bullying is regarded as unacceptable, aiming to produce a safe and secure environment where all can learn without anxiety, aiming to produce a consistent response to any bullying that may occur and to make all connected with the school aware of the schools opposition to bullying and to make clear each person’s responsibilities with regard to the eradication of bullying. It then goes on to explain the roles of staff and parent in both dealing with and eradicating bullying, this includes:- 1) The Governors, their role is to support the headteacher in eliminating bullying in the school, they monitor any incidents that occur and review the effectiveness of the school policy regularly. 2) The Headteacher, it is the responsibility of the head to implement the policy and to ensure all members of staff (both teaching and non-teaching) are aware of the policy and how to deal with any incidents that may arise. The head also reports to the governors about the effectiveness of the policy and if it needs amending. ) The Teaching Staff, teaching staff should intervene at the first sign of any bullying, they must keep records of all incidents that happen involving children in their class, if they see another child from another class being bullied or bullying they should immediately inform that childs class teacher so they can intervene and monitor the situation. T eachers routinely liase with each other through staff meetings and discuss existing or new anti-bullying strategies. 4) Non-Teaching Staff, they are instructed to report any signs of bullying straight away to a member of the teaching staff, who can then direct the ssue to the correct teacher. They should intervene straight away and get the names of all children involved so it can be followed up correctly and efficiently. 5) The Parents, any parent that is concerned that their child might be being bullied, or who suspect their child may be the perpetrator of bullying, should contact their childs class teacher immediately. Parents have a responsibility to support the schools anti-bullying policy and to actively encourage their chaild to be a positive member of the school. The policy then goes on to state that it is monitored by the headteacher , who reports to the governors about its effectiveness. The schools whole school attendance policy starts with an introduction as to why it is important the child attends school and has as fewer absences as possible, including the missing of work and how this can affect their education and intellectual development. It then goes on to explain types of absences both authorised and unauthorised, authorised absences include sickness, medical appointments and any emergencies. Unauthorised absences are those that the school does not consider reasonable, these include, truancy, children being generally late, birthdays, holidays in term time not agreed with the school and holidays that exceed those agreed by the school. It is explained that persistent absenteeism at my setting is classed as missing 20% of the school year, it goes on to say that this severely hampers a childs intellectual development, persistent absentee pupils (PA’s) are tracked and monitored closely and all of these cases are automatically made known to the Local Authority Attendance Team. The policy then states the absence procedure of contacting the school as soon as possible , if not contacted the school will telephone the parent/carer on the first day of absence, if absence persists invite in the parent/carer to discuss the situation and refer to the Early Intervention Officer linked with the school if attendance moves below 85% as per Local Authority protocol. It then explains the role of the Attendance Officer, which is to try and resolve any issues with the school and make a signed agreement with the parent/carer about future attendance, if the matter still persists they can sanction penalty notices or even prosecutions in the Magistrates court, these are of course the last resort if all other avenues have failed. It then goes on to holidays in term time where it says how taking these holidays can affect the childs schooling and that any monetary saving of these holidays can be at the cost of the childs intellectual development. Religious absences such as Eid are authorised but no more 3 days in a school year. Finally the policy states the roles of individuals and their responsibilities of them in keeping to this policy, they are:- Parent/ carer should ensure regular attendance, contact school, try to avoid in term holidays Pupils attend school/registration punctually, speak to an adult if any issues arise that may effect school attendance Headteacher should take lead in ensuring attendance has a high profile in the school, ensur all staff know their responsibilities, take overall responsibility for ensuring the school conforms to all statutory requirements in respect of attendance All school staff should provide a welcoming atmosphere to encourage childrens attendance and provide a safe learning environment, provide a sympathetic response to pupils concerns, be aware of the factors that may contribute to non-attendance, participate in training regarding school procedures. Finally the policy document shows an example of the application for absence from school form to be filled out for any holidays or extended leave, a copy of this is included in this assignment.

Death For Your Country Essays - France, Battle Of The Somme

Death For Your Country Essays - France, Battle Of The Somme Death for Your Country Is it glorious to die for your country?.... This question has been posed to many young people about to embark on war although the answer has usually been 'yes' in response to their country due mainly to the fact that the government instills it in the people of the country to support one's country and one way is to send young abled bodied men into the army. If you were one individual that was not in favour of fighting for your country you would surely become an outcast by the countries people. To avoid ridicule and becoming outcasted by the people living around you, you would join the army just in the thought that you were obligated to for the sole sake of your country. Such thoughts were reinforced by the government promotion of propaganda. Glorifying death is not needed to be taught and should be up to the sole individual. School systems should teach an unbiased point of view of war to enable the child to make their own decision to fight for one's country. Within the education system it was instructed to the teachers to teach the children at a young age during the brink of war to instill that their the life of the country and for them to defend their country against the enemy. Teachers showed being in a army was representing honour and the pride of the country. Guilt was laid on the students who showed rebellion by the teacher. Many times the teacher would try to show a soldier that looks happy and content trying to represent being a soldier makes you happy and content. Many young inexperienced soldiers were sent to training camps near the battle fields that they would soon be sent to fight, for their country and their life. The training camps were situated on similar enviroments that resembled the battle fields of where the fighting would take place. Reinforced displine to the young and ignorant men. Trench warfare is when many soldiers of opposing countries fight against each other across a vast desolate, dirt covered land, and the only sense of cover was to crouch in a usually water logged trench. The sense of death engulfed your very soul, the conezt bombardment of shells echo in your mind long after it had ceased. On the Western front conditions were horrible to say the least, stench of death remained coneztly in the air, bodies riddled with bullet wounds lay across the bottoms of the trenches, dismembered bodies scattered across the landscape and the sounds of agonizing and dying men echo across the battle grounds. Very limited rations offering very little in flavour was the only food available to the soldiers. Often raining, it caused muddy, damp conditions. The men staying in a trench filled with water and muddy conditions often caused such diseases as trench foot and trench mouth. Contagious diseases were spread quickly. Lack of cleaniness gave many soldiers lice and rats would run through the trenches feeding on the garbage and human wastes. Thousands of soldiers would line up under the cover of their trenches for a stretch of miles and wait for the leading officer to give the signal for the charge. When the signal was given the thousands of soldiers would all try to run across the no-man's land to attempt the breach of the enemies trench. This charge would be under conezt machine gun fire and mortar shelling by the enemy. These kind of attacks usually failed maily due to the fact the odds were already stacked against the attacking party. The diezces the charging men had to run to get to the enemies trench was far enough for the enemy to use it's conezt shelling and it's machine gun fire to dwindle the attacking army significant enough for the attacking army to retreat. Counter attacks were quickly attempted after the attacks. The counter attacks were similiar to the actual attacks except the difference was that the counter attack involved the killing of the retreating of the enemy instead of attacking someone under the cover of the trench. During the war all soldiers were affected either physically or phsycologically. Shell shock was an

Using Social Media to Market a Chiropractors Practice Essay

Using Social Media to Market a Chiropractors Practice - Essay Example The essay "Using Social Media to Market a Chiropractor’s Practice" looks at using social media to market a chiropractic practice looking at some of the options that are available, the costs, critical issues and advantages and disadvantages since integrating social media into marketing can help to significantly expand into other areas. The question of the extent to which chiropractors make use of social media to market their practice is one which is increasingly being debated. It has been argued that many chiropractors are constantly ignoring the reality as well as the potential that accompanies social media marketing subsequently leaving them behind. Integrating social media into any efforts at marketing can help to significantly expand into other areas that were previously not possible. Far from the days when one had to log into their Facebook and Twitter accounts in order to post updates, technology has evolved to provide tools including Hootsuite which present the chance to post updates to many social networks at once. Another perception is that social media is an expensive undertaking especially with regard to the notion that one will need to hire specialists and companies to put in place a social network profile for the practice. It is true that companies can enable the individual chiropractor to save a significant amount of time with regard to tasks that are related to the internet including setting up fan pages. Communication with the audience is a responsibility that can be carried out by the office staff.

Research project Essay Example | Topics and Well Written Essays - 750 words - 1

Research project - Essay Example The projected net income before bonuses for the year is $17.2 million. The preliminary net income before bonuses for the first quarter is $3.7 million. According to (FASB 11) inaccurate recognition of bonuses result into inaccuracies within financial statements and hence it is important to make appropriate recording of bonuses as well as well as taxes associated with the same. Treatment of accounting transactions often requires careful consideration of the implications of the same both technically and at ethical levels. Reliable sources often emphasize the importance of accruing bonuses whenever it is expected that the company’s financial/operational performance will at least be equivalent to the set performance levels to warrant issuance of bonuses (Kimball 12). The accrual decision requires considerable judgment of the performance of the entire period which encompasses many future months during which one thing or another may impede achievement of the bonus plan objectives. A number of alternatives have been proposed for accrual of bonuses. These include: Non-accrual of expense until a reasonable probability of achieving the bonus is present Accrual of a smaller expense early in a given performance period to reflect high performance failure risk and accrue a larger expense in future when success probability is extremely high It is not advisable that one accrues significant bonus expense in an instance where probability of awarding the bonus is extremely low (Stickney 80). Such accruals provide a false expense which might be reversed later when the performance period comes to an end. A sample bonus accrual expense for the case presented could be as follows,    Debit Credit Bonus expense 185,000      Ã‚  Ã‚  Ã‚   Accrued bonus liability    185,000 Where payment for the accrued bonus is made later, the journal entry eliminates accrued bonus liability whilst recognizing any arising payroll tax liabilities which are associated with the accrued bonus. A entry for this could be as follows,    Debit Credit Accrued bonus liability 185,000   Ã‚  Ã‚  Ã‚   Cash    xxx Taxes    xxx As a matter of fact, when a percentage bonus is issued at the end of every quarter, it is important to recognize a portion of the bonus at the end of each month’s closing financial statements. For instance, the 5% bonus at each quarter’s end, an accrual of 5% of total salary expense is recorded at the end of every month’s cycle closure (FASB 54). A debit is posted to employee bonuses account for total accrual amount and credit is made to bonus accrual account. In the case discussed in the report, the bonus payment is pegged to the projected net income before bonuses of $17.2 million. However, going by the earnings for the current quarter, there is no high likelihood of attaining the projected income before payment of bonuses and hence its non-accrual is recommended until such time that the probability of attaining the projected i ncome before bonus is achieved. In general, the best way to treat the bonus expense is to handle it as an accrued expense or rather an expense incurred but not yet paid. This is consideration of the fact that whilst the bonus is anticipated, changes in the financial results of the company can prevent the company from incurring this expense at the end of the financial period. Incurrence of this expense is pegged on a condition which must be achieved for it to be affected.